Comfort Flow Heating Blog:
Posts Tagged ‘Heating Installation’

Comparing Gas and Electric Furnaces

Monday, November 27th, 2017

furnace-gas-with-pipesWith few exceptions, all modern homes use electricity. But when it comes to home heating, electricity isn’t always the top choice. Natural gas, piped in through municipal lines, provides power to gas furnaces that are fast and effective at heating up a home during the winter. However, the option always exists to have an electric furnace instead. Furnaces are a flexible type of heating system, with different models using a range of energy sources. That’s why it’s easy for furnace installation experts to find a furnace to match almost any house.

Gas furnace and electric furnaces remain the two most common choices. Is there one that’s automatically a better option than the other? Let’s take a closer look at them to provide an answer to that question—but we’ll tell you upfront that the answer is “it depends on your home’s needs.” Trust to HVAC professionals to ensure you have the best possible heating system installation.

Continue Reading

Is a Furnace Usually the Best Choice to Heat a Home?

Monday, December 19th, 2016

Furnaces are common in modern homes. In fact, the natural gas furnace is the system found in more homes in than U.S. than any other. So the easy assumption to make is that a furnace is simply the ideal choice for home heating.

Is there any truth to this?

Continue Reading

Steps to Take for Heating Installation

Wednesday, January 14th, 2015

Heating installation involves a lot more than selecting a heating unit and having it installed – that is, if you want the installation done correctly. Rushing the process not only robs you of the opportunity to install a potentially better system for your home, you may wind up with a unit that is the wrong size. So what steps should you take? Here are some suggestions from our Comfort Flow Heating installation experts for Salem residents:

Review Your Choices

Not too long ago, there were basically two choices for heating: a furnace or a boiler. These days homeowners have an array of choices. The heat options we carry at Comfort Flow Heating are:

  • Furnaces (gas or electric)
  • Heat pumps
  • Ductless systems
  • Radiant systems (electric)
  • Geothermal systems

Review Energy Efficiency

Every heating system comes with an energy efficiency rating. For combustion systems, this rating is known as AFUE (annual fuel utilization efficiency); heat pumps use a SEER rating for air conditioning and HSPF for heating. Electric radiant heating efficiency will be based on the kilowatt hours. Understanding the energy efficiency a particular type of system can offer you is an important part of your long-term comfort with a heating system, so it shouldn’t be overlooked.

Calculate Heat Load

Every home needs a certain amount of heating to be comfortable; too much can make the air hot and dry and too little can leave you feeling chilly. Heat load involves more than just knowing the square footage of your home; other factors to consider are your home’s orientation, floor plan, number of occupants, etc. Allowing a trained specialist to calculate your heat load helps ensure that you’ll purchase and install a heating system that is correctly-sized for your home.

New heating installation in Salem is a great opportunity to increase your energy efficiency and comfort; don’t let it slip by because you are rushing to install a new system. If you are in need of a new heating system, call the experts at Comfort Flow Heating in Salem today!

Continue Reading

Here’s Why You Need to Replace Your Heater

Tuesday, December 10th, 2013

Oregon doesn’t experience the bitter winters of some of the states to our east, but we still need to have heaters in good shape year round to combat our many rainy days. Your heating system will see a lot of extra work each winter season… and eventually, no matter how sturdy and reliable it is, it will need to be replaced.

Having a new heater installed is a large task, one you shouldn’t undertake lightly. But you need to know when it’s necessary. We will give you some reasons why that old heater needs to go and a new one brought in. To make this task much easier, contact Comfort Flow Heating, where we provide professional heating service in Salem, OR—and have done so for more than half a century

Why it’s time to replace your heater

  • Inefficiency: Age will eventually wear down any mechanical system, no matter how well it is maintained. If your heater has exceeded its manufacturer’s expected lifespan, then pay attention to your heating bills to see if they have started to rise. If they do, then you know that the wear on the heater has impaired its ability to work efficiently. You should replace it, since the new heating system will offer you savings on your energy bills for many years to come.
  • Noise pollution: A heater growing decrepit will start to turn noisy. Increased noise is usually a sign that it’s time for a replacement, but the noise on its own will soon turn into an extreme annoyance.
  • Take advantage of new technology: A new installation will not only compensate for the older heater’s inefficiency, it will probably vastly improve on it with technological advances. The heaters of today are already far ahead of what they were only twenty years ago in terms of fuel efficiency. In addition, you can update to a new fuel source, put in zone heating, update your thermostat, or switch to a new form of heating altogether. You can also help the environment with a heater that creates fewer emissions.

Consult with professionals

Before you choose to send your old heater to the scrap heap, bring in heating installation and repair specialists to examine it. They can determine if it is indeed a good idea to have a new heater installed. They will also provide suggestions for the best system to install as a replacement.

When you need heating service in Salem, OR, give Comfort Flow Heating a call. We install top brand furnaces, air source heat pumps, geothermal heat pumps, and radiant heating systems. Sign up for maintenance with us as well to make sure your new heater lasts for many years.

Continue Reading

What Does AFUE Mean?

Wednesday, October 23rd, 2013

If you own a home in Eugene, heating installation is going to occupy your full attention sooner or later. We need reliable heaters to handle our cold, wet weather, and while proper maintenance can keep yours going for a long time, every heater breaks down sooner or later. When considering a new heater, there’s a lot of things to keep in mind, including a strange little number called an AFUE rating. What does AFUE mean? And more importantly, why should you pay attention to it when buying a new furnace?

The term stands for “annual fuel utilization efficiency,” and as you may have guessed, it measures the efficiency of the furnace. It’s measured in a percentage, representing the amount of the furnace’s energy that actually goes into generating heat, rather than being lost to waste and inefficiency.  So for example, a furnace with an 80% AFUE generates heat with 80% of its energy, with the other20% lost to waste.

Obviously, the higher the AFUE rating, the more efficient the furnace itself is. And as you may have guessed, newer units tend to have higher AFUE ratings than older units, which have lost efficiency thanks to outdated technology and the wear and tear of regular use. In fact, as of May 2013, the U.S. Government stipulates that all new oil furnaces must have a minimum AFUE rating of 75% and gas furnaces must have a minimum AFUE rating of 80%. If you have an older furnace, it’s almost certain to have a lower rating than this.

Gauging the AFUE rating of your furnace is just one of the steps you need to take, along with sizing your home properly and deciding if you want to use a traditional central system or an alternate model such as a heat pump. If you’re asking “what does AFUE mean?” contact the experts at Comfort Flow Heating for advice. We can make recommendations for you based on your individual needs, then set up a time for installation that matches your schedule. Heating installation service in Eugene is no laughing matter. Let our trained staff of heating installation professionals help make the process easy for you.

Continue Reading

What Type of Heater Is Right for Your Home?

Monday, September 16th, 2013

If you are thinking about installing a heater in your home—whether you’ve moved into a new house or you want to replace an older system—you will face many choices. Modern heating technology has advanced to offer numerous quality options, but you shouldn’t simply pick one and hope for the best. Homes have individual needs, and you should have the right heating system to fill those needs and perform efficiently. When you are ready for heating services, call our Eugene, OR heating installation experts at Comfort Flow Heating.

To correctly gauge the best type of heater for your home, you need an experienced technician to conduct a heat load calculation. This is a specialized service that takes into consideration the square footage of your home, the number of people living there, the size and position of your windows, the amount of heat produced by other appliances, and many other factors. An HVAC professional inserts this data into an equation to calculate your home’s heat load. Not only will this provide a guide for what type of heater will best serve you, it also determines the best size heater to get.

Some of the kinds of heaters to consider:

Heat Pumps

This is a useful option, since heat pumps can also function as an air conditioner when the weather turns warms. In simple terms, a heat pump is an AC that can reverse the flow of hot air so that instead of pulling hot air out of your home, it puts it into your home. Heat pumps are reliable and sturdy, but may have trouble overcoming extreme cold conditions.

Furnaces

If your home already has existing ductwork for air conditioning, getting a furnace may be a good choice. Modern furnaces can run on gas, oil, or electricity. The variety of types makes furnaces one of the most flexible options for home heating.

Boilers

Boilers heat up water in a tank and then circulate steam or hot water through pipes and radiators to warm up your house. Boilers don’t require ducts, and because they don’t circulate air to provide heat, they can offer improved air quality.

Installing a heater is a complicated task you should leave to professionals. Contact Comfort Flow Heating today for your Eugene, OR heating installation needs. You’ll see why we’ve grown to serve over 20,000 clients.

Continue Reading

Springfield Heating FAQ: Heating Options in Springfield

Monday, January 21st, 2013

When you live in Springfield, OR, a good heating system is absolutely necessary to make sure that you stay comfortable during the winter. But which system is best for your home and for your personal preference. At Comfort Flow, we wanted to help out our local customers by putting together a quick guide about some of the more popular heating systems in Springfield, OR. If you have any questions about heating systems and which one is best for your home, just call your local Springfield heating contractor.

Traditional Furnaces and Boilers

The furnace and the boiler are two of the most popular heating system in the United States. They provide comfortable heat and are relatively efficient systems – especially if you bought yours less than 5 years ago. Furnaces are generally less expensive up front but can sometimes cause indoor air quality issues because they blow air around your home. Boilers are usually more expensive to install but offer comfortable radiant heat.

Heat Pumps in Springfield, OR

Heat pumps are a tremendously efficient way to heat your home. As a bonus, they also offer cooling for your home during the summer. Heat pumps are very efficient heating systems because they don’t actually consume any fuel to heat your home: they just move heat around. In heating mode, they collect heat from the outside air and move it into your home. However, during very cold winters, this can potentially be a problem when there is very little heat in the air. During those times, a back-up heating system is usually required.

Geothermal Heating and Air Conditioning Systems in Springfield, OR

Geothermal heating and AC systems are basically a heat pump. But unlike an air-source heat pump, geothermal systems use the energy stored in the ground to heat and cool your home. Geothermal systems required a large series of pipes to be buried in the ground and filled with refrigerant. In heating mode, the pipes gather heat stored in the earth and use it to heat your home. In cooling mode they do just the opposite: heat is removed from your home and deposited into the ground. These are very efficient systems that are able to take advantage of renewable energy in the earth.

When you need any kind of heating services, from heating installation to heating repairs, call Comfort Flow. We have experience working with all types and brands of heating systems in Springfield, OR.

Continue Reading

Eugene, OR Heating Guide: Tips on How to Navigate Buying a Furnace

Monday, September 17th, 2012

Replacing an older furnace is a great way to save money by lowering your energy bills. That’s because newer models are much more energy efficient than those made even 15 years ago. If you’re in the market for a new furnace in Eugene, there are some things you should think about before spending any money. Doing a little bit of research upfront can end up saving you a lot in the long run.

Size is one of the biggest things to consider. A system that’s too small will have to work harder to get your home to the desired temperature, causing it to continually draw in more fuel, greatly increasing your energy bill.

Some people try to overcompensate for this by buying a furnace which is bigger than their home needs. The problem with doing this is that a larger system will cycle on and off more frequently, which is also counterproductive to saving energy. The proper size system for your home falls in between these two extremes and cycles on and off at the right times to keep your home comfortable.

Efficiency is also important and can be seen in a system’s AFUE (Annual Fuel Utilization Efficiency) rating. The higher the AFUE rating number, the better the system is at garnering heat from a set amount of fuel. The more efficient a system is, the lower its emissions, and that’s also better for the environment.

One drawback to a system with a higher AFUE rating is the higher initial installation cost. The benefit is lower energy bills for the life of the system, which can add up to significant savings over the long run.

If you’re looking at a specific brand of furnace, it may pay to do some checking online or with a professional Eugene OR heating company to see how the competition stacks up. Someone who works exclusively with HVAC systems can give a lot of insight into what brands and models are tried and true, which ones seem to need frequent repair, and even which ones haven’t been on the market long enough to have been thoroughly tested over time. All of these are important things to consider before making your final purchasing decision.

For any help choosing a furnace in the Eugene area, give Comfort Flow Heating a call!

Continue Reading